Citrix NetScaler Quick Start Guide: MPX 25100 40G, MPX 25160 40G Platform
5
The NetScaler MPX 25100 40G, MPX 25160 40G appliances have the following ports:
RS232 serial Console Port.
10/100Base-T copper Ethernet Port (RJ45), also called the LOM port. You can use this
port to remotely monitor and manage the appliance independently of the NetScaler
software.
Two 10/100/1000Base-T copper Ethernet Management Ports (RJ45), numbered 0/1 and
0/2 from left to right. These ports are used to connect directly to the appliance for
system administration functions.
Network Ports, four 40G QSFP+ ports and sixteen 10G SFP+ ports (4x40G QSFP+ +
16x10G SFP+).
Note the following points regarding the network ports on 25000-40G appliances:
o
10G ports do not support 1G copper or 1G fiber transceivers.
o
40G ports do not support 10G and 1G transceivers.
The following figure shows the back panel of the MPX 25100 40G, MPX 25160 40G appliance.
Figure 2. Citrix NetScaler MPX 25100 40G, MPX 25160 40G, back panel
