Citrix EasyCall Gateway, Руководство интегратора

Страница: 33 / 38

Chapter 4 Nortel E1 QSIG Trunk Integration 29
Defining a PRI Service Route
The following example shows how to add a PRI service route using LD 16. For all
other fields not listed in the example, press
Enter to use default values.
Defining Service Channels and PRI Trunks
The following example shows how to create service channels and PRI trunks using LD
14. For all other fields not listed in the example, press
Enter to use default values.
Prompt Response Description
REQ NEW
Create new data.
TYPE RDB
Route data block.
CUST 0
Customer number.
ROUT 10
Route number.
DES E1_QSIG
Designator field for trunk.
TKTP TIE
Trunk type.
DTRK YES
Digital trunk route.
ISDN YES
ISDN option.
MODE PRI
Route used for PRI only.
PNI 1
Customer private network identifier. Is the same as
the CDB PNI at far-end.
IFC ISGF
Interface type.
ICOG IAO
Incoming and outgoing.
ACOD 8010
Trunk access code.
Prompt Response Description
REQ NEW 30
Create 30 new trunks.
TYPE Tie
Trunk type.
TN 10 1
Loop (card) and channel number for digital trunks.
PCML A
System PCM law.
DES E1_QSIG
Designator field for trunk.
CUST 0
Customer number.
RTMB 10 1
Service route number and trunk member number.
CLS UNR DTN
Trunk Class Of Service.