10
CITO Rule Puller
Hints
CITO-SYSTEM GmbH
• Haimendorfer Str. 37+46
• 90571 Schwaig bei Nürnberg/Germany
Phone +49 911 95885-0
• Fax +49 911 95885-50 • [email protected]
• www.cito.de
MEA00079
MEA00079-NR150216-EN
1) Lubrication is not necessary for the Rule Puller.
Note:
avoid using under humid conditions in order to prevent the steel jaws
from rusting.
Lubrication
1) Hold the handle and main body while moving, and avoid letting the Rule
Puller fall onto the ground, which may injure hand and foot.
Transport
1) The Rule Puller should not be placed and stored under humid condition or
exposed to sunshine and rain in order to avoid rusting.
2) The Rule Puller should be placed in a die-room with in-door temperature
and humidity.
Storage
1) The manufacturer reserves the right to alter the content of the operation
& maintenance manual at any time.
Remarks
1) Before use, please read the operation & maintenance manual carefully.
2) The manufacturer or re-seller of the Rule Puller is not responsible for any
claim arising from operator’s negligence or careless use of Rule Puller.
3) The manufacturer or re-seller of the Rule Puller further disclaims respon-
sibility for claim of loss and damage arising from improper use of the Rule
Puller.
4) Using the Rule Puller implies that the operator has read and agreed to the
terms listed in the operation & maintenance manual.
Disclaimer
