CITIZEN QUARTZ
Windsurfing
Model No. MC6XXX
Cal. No. D28A/D28B
• INSTRUCTION MANUAL
CTZ-B6910
1. Explanation of Displays and Buttons
Although the display may vary according to the
model, the operating procedure is the same.
2. Features
This watch is a digital watch equipped with numerous
funcions including time display, calendar, alarm,
stopwatch, timer 1, timer 2, and a chime.
In addition, it also has an EL (electroluminescence)
internal illumination function that enables the display to
be viewed in the dark.
3. Switching the mode
• Pressing button
M
switches mode in the manner
shown below.
• The date is displayed for as long as button
A
is
pressed while the watch is showing the nornal time
display.
4. Name and Functions of Buttons and Displays
5. Setting the Time and Calendar
1) Pressing and holding button
B
in for at least 1
second while in the time and calendar display
causes the seconds digits to flash enabling the
seconds to be reset
2) Press button
A
to reset the seconds.
• When the seconds displayed are from 30 seconds
to 59 seconds, pressing button
A
returns the
seconds digits to zero and advances the minutes
by 1.
3) Each time button
B
is pressed, the flashing
portion of the display will change as shown
below. Press button
B
until the digits of the
display you want to correct flashes.
4) Press button
A
to correct the flashing digits of
the display.
• Pressing and holding button
A
in will cause the
flashing digits to advance rapidly.
5) After making the correction, press button
M
to
return the watch to the normal time diplay.
✩
When using a 12-hour clock for displaying time,
make sure AM or PM is set correctly.
✩
If the calendar is set to a date that does not exist
(such as February 30), the date will automatically
be corrected to the first day of the following
month as the watch is returned to the normal time
display.
✩
The calendar does not have to be corrected on
the last day of the month.The watch performs this
automatically. The watch does use February 29
however.
✩
Pressing button
M
while in the setting state,
returns the watch to the normal time display.
✩
If a button is not pressed for 1 minute while in the
setting state, the watch will automatically return to
the normal time display.
