Citizen PMU-2200II, Руководство по обслуживанию

Страница: 16 / 45

PMU2200
Ⅱ
/2300
ⅡSERIES
Service Manual
-
15
-
2. Removeng PNE Sensor
Insert from left
／
Insert from right
1. Remove M4x6(ST) Screw.
6: 60mm 8: 80mm 1: 102mm
Insert from top
1. Remove M3x3(ST) Screw.
*Attention at reassembly
The cable is passed through the hole
Shaft Paper Holder
*Attention at reassembly
Put Plate Paper Holder and SA PNE Sensor between
Shaft Paper Holder, and stop it with the screw.
Installed position is different depending on the
specification.
Paper Holder
PNE Sensor
M4x6(ST)
M3x3(ST)
*Attention at reassembly
Put Plate Paper Holder and SA PNE Sensor
between Shaft Paper Holder, and stop it with
the screw.
*Attention at reassembly
Connect BM Sensor with CN108 of
Borad Main do not make a mistake
because CN108 and CN109 are
connectors of this type.
CN108