PRU·PMU·PHU SERIES SPECIFICATIONS
18
4.3 Outputting Printed Paper
The following sequence takes place in synchronism with the driving of the auto-cutter.
Amount of paper feed
less than 63 mm?
Paper feed of difference
of 63 mm performed.
* While feeding this difference of paper (blank
feed), if a paper-out condition occurs, the
auto-cutter is not driven, and the equipment
goes into a “wait-alarm-reset” state.
Full cutting (Auto cutter is
driven.)
* For the ACS-230 initialization sequence and
drive sequence, refer to the separate
“Specifications for the ACS-230”.
1.5 second timer
timed out?
Presenter is turned off.
Paper outputted
from paper exit slot?
Complete
Cutter driving
Presenter is driven.
1.5 second timer is
started.
No
Yes
No
Yes
Yes
No
