– 20 –
Things to be Aware of when Inserting Paper
[
While loading the paper sometimes it is impossible to feed in when the printer
is in the Head-down state.
When this occurs put the printer in the Head-up position and turn the platen roller
knob to feed in the paper.
[
Before you print, make sure that the paper is in straight at the point where the paper
comes out above the thermal print head.
When the paper is not straight, a paper jam will often result.
[
To avoid crooked paper entry, make sure the front of the paper you are inserting is in
good condition as shown in the illustrations below.
★
When the Paper runs out in the middle of a print job
When the paper runs out while printing, the printer temporarily stops.
If this happens do not turn the power off.
If you turn off the printer, the data yet to be printed will be lost.
If there is still print data in the printer, replace the paper following the method described
in the section "Installing the Paper". After you have set the paper put the paper depress
lever down and the printer will continue the print job.
OK
NG
NG
NG
