74
75
English
Troubleshooting
1. Correct the reference position.
See page 67.
2. Set the city.
See page 22.
• To set Daylight Saving Time, see
page 31.
3. Set the time.
To adjust the time by receiving the time signal, see page
59. To adjust the time
manually, see page 61.
◆
All Reset
When the watch does not work properly, you can reset all the settings. If the
power reserve is insufficient, fully charge the watch.
Check before performing All Reset.
After performing All Reset, you will need to configure all settings.
Completely set the watch by following the procedures outlined below:
Troubleshooting
◆
Performing the All Reset
Perform this operation after checking the contents of the previous page in this manual.
1. Pull the crown out to position
2
.
2. Press and hold both the lower right button
Ⓐ
and the
upper right button
Ⓑ
for four or more seconds.
All Reset will be performed.
The settings will be reset as follows:
The settings after All Reset
•
The reference positions of each hand
: the position which the
crown is in the position 0 (0 o'clock, 0 minute, 0 second)
•
Calendar
:
Leap year, January 1/Sunday
•
City
:
LON (London)
•
Daylight Saving Time
:
Normal time (all cities
are set to STD-AU)
•
Switching of Daylight Saving Time :
Auto
•
Alarm time
:
0 o'clock 0minute
•
Alarm ON / OFF
:
OFF
Ⓑ
Ⓐ
0 1
2
