176
177
A. Power Saving Function
If the watch face is kept in a place with no light for 1 week, the hands will stop at the
12:00 position and the watch will enter power saving mode.
[The following functions are available
even during power saving mode]
• Regular automatic reception.
The watch will receive the radio signals at 2
a.m. every day. If a signal cannot be
received at 2 a.m., it will try again
automatically at 4 a.m.
• The time is always being kept inside the
watch.
• The date will stop at the position between
yesterday and today. Thereafter the date will
be automatically adjusted once every day at
midnight.
<Turning Off the Power Saving Function>
The power saving mode will be automatically canceled when the watch face is exposed
to light.
• After the power saving mode has been canceled, the hands will rapidly move to the
current time and return to 1-second interval movement.
• If the watch is insufficiently charged, the second hand will begin the 2-second interval
movement. When this happens, sufficiently charge the watch so that it returns to 1-
second interval movement.
NOTE:
• Although the watch will continue to automatically receive radio signals when in the
power saving mode, it may not be able to receive the signals depending on the
environmental in which the watch is stored. After the power saving mode has been
canceled, press button (A) once to see the reception status. If the time is incorrect, use
on demand reception to set the correct time before using the watch.
• The power saving mode cannot be canceled with crown or button operations.
Cancel the mode by placing the watch in light.
The hands will stop at the 12:00
position and the date will stop at the
position between yesterday and today.
