11
W
When Storing in a Dark Location for a Long
Period of Time
W
If the watch is stored in a location out of the light for a period of one week or more,
the Power Save Function of the watch is activated and the watch stops. Even
though the watch is in the Power Save mode, it still continues to perform Regular
Automatic Reception and the watch continues to keep the correct time internally.
However, the time may not be able to be corrected as a result of being unable to
receive radio waves depending on the manner in which the watch is stored. When
resuming use of the watch after storing for an extended period of time, cancel the
Power Save function by placing the watch in the light and then perform Free
Reception to correctly set the time and date.
* Refer to “7. A. Power Save Function” for information on the Power Save
function.
10
<Reception Procedure>
(1) Press button (A) located at the 4:00 position for about 2 seconds, and then release the
button after the second hand has moved to the RX (12:00) position.
(2) The second hand then moves to H, M or L indicating that reception is in progress.
(3) When reception is completed, the second hand moves from H, M or L and returns to
one-second interval movement.
* Refer to “3. Receiving Radio Waves” for further details on the procedure for receiving
radio waves.
S
E
T
0
S
E
T
0
S
E
T
0
[Reception Standby]
[Reception in Progress]
[Reception Completed]
RX (Reception
Standby)
Button (A)
Reception
level
(H, M, L)
Second hand returns to one-
second interval movement
