2.
Press the lower right button (A) for more than 2
seconds and release it when the second hand stops
at the RX position.
3.
When reception is complete, the second hand will
leave the RX position and return to normal
movement.
Referring to “Confirming the Reception Status”
(p.128)
, check the reception status.
Recovery Automatic Reception
i
If the watch stops due to insufficient charging, expose
the watch to sunlight to recharge it. When the watch
is recharged sufficiently, it will automatically receive
the radio wave once. Please remember to keep the
watch charged to prevent this situation from occurring.
j
If the lower right button (A) is pressed for more than 2 seconds during reception,
the reception will be cancelled and the hands will return to their normal movement.
127
126
7. Receiving the Radio Waves
Automatic Reception
i
Place the watch in a stable location near a window where the radio wave can be
easily received with the 9:00 position pointing towards the transmitter. The watch
will receive the radio waves at 2 a.m. every day. If the radio wave cannot be
received at 2 a.m., it will try again automatically at 4 a.m.
On Demand Reception
(Manual Reception)
Radio waves can be received at any time.
* Not possible when the radio wave is interrupted
Use this function when automatic reception is impossible due to changes in the
reception environment.
(Depending on the weather or noise conditions, reception can take up to 15
minutes.)
1.
Remove the watch from your wrist and place on a stable surface near a window
where the radio wave can be easily received, pointing the 9:00 position in the
direction of the radio wave transmitter.
The second hand stops
at the RX position.
Button (A)
