Citizen H162, Руководство пользователя

Страница: 63 / 74

63
• The rubber gaskets and other seals used in this watch will deteriorate over time and use. If the
gaskets and seals are not checked at regular intervals, their condition may not be sufficient
to guard against the entrance of moisture. In order to maintain the water resistant quality of
your watch, we recommend that you have the gaskets and seals of your watch inspected by a
CITIZEN Authorized Service Center every two to three years. More frequent inspections may
be necessary if the watch is used in environments such as chlorinated pools or if the watch is
not rinsed with clear water after use in salt water. Gaskets and seals used to guard against the
entrance of moisture are considered consumable supplies that are not covered under the terms
of the warranty. Inspections and any components that need to be replaced in order to maintain
the water resistant quality of the timepiece are at the expense of the consumer.
• If moisture has entered the watch, or if the inside of the glass is fogged up and does not become
clear for an extended period of time, do not leave the watch in that state; instead, immediately
take the watch to the Citizen Consumer Help Desk or your nearest Customer Support Center
for inspection and repair.
• If sea water enters the watch, place the watch in a box or plastic bag, and immediately take it
in for repair. Otherwise, the pressure inside the watch will increase and parts (such as the glass
and buttons) may come off.
• Be sure to use the watch with the crown pressed in fully (normal position) to ensure the
water resistance. If the crown of your watch is the screw down crown, be sure to tighten it
completely.
• Do not operate the crown or buttons when the watch is wet.