Resetting the watch — All Reset
1.
Pull the crown out to position
1
.
2.
Rotate the crown to move the mode hand to point [
CHR
].
3.
Pull the crown out to position
2
.
The hands and indication move to the current reference positions stored in
memory.
• Proceed to the next step when the hands and indication stop.
4.
Press and release both the lower right button
A
and upper
right button
B
at the same time.
As you release the buttons, the alarm sounds and all reset is executed.
The setting values after All Reset
Time/calendar
January 1, Sunday of leap year
World time
LON
Summer time
SMT OFF at all time zones
Alarm setting
ALM OFF
Alarm time
0:00 AM
Reception result
indication
NO
After All Reset
After All Reset, adjust the reference position, set the time and calendar and
execute alarm setting.
60
SMT
ON
OFF
S
S
F
M
T
T
W
24
ALM
ON
OF
F
TME
TME
CHR
CHR
SET
SET
AL
M
AL
M
RX
NO
OK
LON
AKL
MDY
HNL
ANC
LAX
DE
N
NOU
SYD
TY
O
BJ
S
BK
K
PAR AT
H
RUH
DXB
KH
I
DA
C
PDL
FEN
RIO
MA
O
NY
C
CH
I
KM.
ST
AT
.
NA
UT
.
70
80
90
10
55
50
45
40
35
30
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
1
31
1
31
Checking the reference position
1.
Pull the crown out to position
1
.
2.
Rotate the crown to move the mode hand to point [
CHR
].
3.
Pull the crown out to position
2
.
The hands and indication move to the current reference positions stored in
memory and stop.
4.
Check the reference position.
Correct reference positions:
•
Hour, minute and second hands: 0 hour
00 minute 0 second
•
24-hour hand: “24”
•
Date indication: midway between “31”
and “1”
•
Function indication “30” (straight
below)
When the current reference position is
different from the correct one, proceed to step 3 of “Correcting the reference
position”.
5.
Push the crown in to position
0
.
6.
Change the mode to [
TME
] to finish the procedure.
Correcting the reference position
1.
Pull the crown out to position
1
.
2.
Rotate the crown to move the mode hand to point [
CHR
].
3.
Pull the crown out to position
2
.
4.
Press and release the lower right button
A
.
The function hands move slightly.
5.
Press and release the lower right button
A
repeatedly to
change the hand/indication to be corrected.
• Each time you press the button, the target changes as follows:
Function hand/date indication
→
Hour/minute/24-hour hands
→
Second
hand
→ (back to the top)
• The hands slightly move when selected to show they become adjustable.
• The function hand points “60” (straight above) when the hour, minute,
second and 24-hour hands are the targets of adjustment.
6.
Rotate the crown to adjust the hand/indication.
• The hour, minute and 24-hour hands move synchronously.
• Date indication changes to the next as the function hand rotates 5 times.
• When you rotate the crown quickly a few times, the hand/indication will
move continuously. To stop the rapid movement, rotate the crown in either
direction.
7.
Repeat steps 5 and 6.
8.
Push the crown in to position
0
.
9.
Change the mode to [
TME
] to finish the procedure.
E660 Abbreviated instruction
