Citizen CZ-01, Руководство пользователя, Страница: 27 / 32

Fix with tape.
The printer stopped with the paper partially cut
1
Set the ON/OFF switch to OFF and then ON again.
The paper jam is released and the cutter blade returns to
its standby position.
2
Remove the partially printed part of paper from the printer.
The power has been cut during printing
1
Set the ON/OFF switch to OFF and then ON again.
The partially printed paper is cut into scrap-size pieces and removed.
After this, you can open the top door.
2
Check that no partially printed paper remains in the printer.
Caution
Caution
Caution
Caution
Work was continued while the printer unit’s ON/OFF switch is OFF
4
Reattach the ribbon with tape or similar
material.
5
Rotate the take-up roller until the part
a t t a c h e d w i t h t a p e c a n n o t b e s e e n
anymore.
6
Insert the ribbon in the printer unit.
7
Close the printer unit’s top door.