Citizen CT-S851, Руководство по обслуживанию

Страница: 31 / 69

CT-S851 Series Service Manual
- 29 -
2-2-9. Print Head Error
If abnormal heat generation is detected at the print head for any reason, the print head drive power and the
paper feed motor drive power are shut down. In this case, shut down the printer immediately.
2-2-10. Motor Error
If you print continuously or feed paper continuously, the paper feed motor temperature will rise. If it exceeds
80
°
C, printing or paper feed will stop. When it is cooled to 70
°
C or lower, the error will automatically be reset.
However, the standard model is not equipped with a thermistor as well as such temperature control because
no heat generation exceeding 80
°
C as well as no smoking or ignition was observed with continuous printing
or paper feed at the fault test.
2-2-11. Low Voltage Error
If the power supplied to the printer drops to 16 V or below, operation will stop. In this case, shut down the
printer immediately.
2-2-12. High Voltage Error
If the power supplied to the printer becomes 27 V or above, operation will stop. In this case, shut down the
printer immediately.
2-2-13. Drawer Voltage Error
If the cash drawer drive power is overloaded by any reason (cash drawer fault, connection of external device
other than cash drawer, contamination, etc.) an error will be detected and the cash drawer drive power will be
shut down. In this case, shut down the printer immediately.
2-2-14. Macro Execution Wait
When the ESC/POS command is specified, the macro execution wait state will take effect. The macro will be
executed when the switch is pressed or when a specified time has elapsed.