Citizen CT-S851 II, Руководство пользователя

Страница: 40 / 295

— 36 —
Change the settings of the paper near-end sensor to set the position at which
the near-end of the paper is detected.
1. Use a pointed object, such as a pen, to gently press the button to change the paper
near-end sensor.
2. Press and hold down the button whil e moving the paper near-en d sensor up, down,
right and left. The sensor positions are shown below for the various diameters of the
paper roll used.
Note:
*: Position of sensor when shipped from factory. However, factory settings differ depending on the
destination market.
3.10 Adjusting the Paper Near-end Sensor
(Unit: mm)
Senso r position Diameter when detected as near end Outer diameter of core of paper roll used
A

31

18
B
*

23

18
C Paper near-end sensor function is off
CAUTION

The amount of paper remaining on the roll (diameter of the roll) depends on the type
of paper used.

The paper roll diameters in the table are guidelines.
Button to change paper
near-end sensor
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309