Citizen CT-P292, Руководство по обслуживанию

Страница: 21 / 40

CT-292/293 Series Service Manual
2-2 Explanations of Error Conditions
2-2-1 Head Overheat Error
When the head temperature is raised (approx. 75
°
C or above), the ERROR LED blinks and printing operation
is stopped to protect the print head from overheat.
When the head temperature is lowered (approx. 70
°
C or lower), printing operation is automatically restarted.
2-2-2 Cover Open Error
When the front cover is opened during paper feed or printing, the ERROR LED blinks.
When MSW3-8 is set to OFF: The error is reset when the front cover is closed (auto restore).
When MSW3-8 is set to ON: The error is reset when the front cover is closed and a command is given.
Note: When the front cover is opened during paper feed or printing, the paper sensor may be activated, resulting in the
paper end error.
2-2-3 Cutter Lock Error
The cutter cannot be moved. An error has occurred.
To reset the error, remove the cause of the error, and press the FEED switch or give a command.
2-2-4 Memory Check Error
Memory read/write check operation is not correctly performed. (Restoration not possible)
2-2-5 Low Voltage Error
The voltage supplied to the printer drops.
When this error occurs, immediately turn the power off. (Restoration not possible)
2-2-6 High Voltage Error
The voltage supplied to the printer rises excessively.
When this error occurs, immediately turn the power off. (Restoration not possible)
2-2-7 Paper End
When the paper has run out, the paper sensor in the paper path is activated, the ERROR and PAPER LEDs
light up, and then printing operation is stopped.
Open the front cover and set new paper.
2-2-8 Macro Execution Wait
When the ESC/POS command is specified, the macro execution wait state will take effect. Press the FEED
switch.
- 20 -