Citizen CT-D150, Справочник по командам

Страница: 194 / 512

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281 CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
CT-D151/E651
- 193 -
FS ( A pL pH fn […]
[Function] Setting font attribute of Kanji
[Outline] Setting Kanji font attribute means execution of processing for Kanji font attribute by the value of “fn” specified.
fn Function
48 Sets Kanji font
[Outline] [The specification which is common to the model]
This command is effective only for the Japanese Kanji specifications.
fn=48: Function 48 Set Kanji fonts
FS ( A pL pH fn m
[Code] <1C>H<28>H<41>H <pL>< pH>< fn>< m>
[Range] (pL+pH×256)=2 (pL=2, pH=0)
fn=48
0
≤m≤2, 48≤m≤50
[Default] m=0
[Outline] [The specification which is common to the model]
Prints the succeeding characters with energy set for “m”.
This command is effective only for the Japanese Kanji specifications.
[The specification which depend on the model]
CT-S280 / CT-S281 / CT-S300 / CT-S310 / CT-P29x series /
CT-S801(II) / CT-S851(II) / CT-S601(II) / CT-S651(II) / CT-S310II / CT-S251 / CT-D150 / CT-E351 / CT-D
151 / CT-E651
m Function
0, 48 Kanji font A(24×24)
1, 49 invalid
2, 50 Kanji font C(16×16)
CT-S2000 / CT-S4000
m Function
0, 48 Kanji font A(24×24)
1, 49 Kanji font B(20×24)
2, 50 Kanji font C(16×16)