Citizen CL-S400DT Скачать руководство пользователя страница 4

-4-

SAFETY SIGNS

that must be strictly observed! 

To prevent personal injury or property damage, the following must be strictly 
observed.

 

z

The degree of possible injury and damage due to incorrect use or 
improperly following instructions specified is described below.

WARNING

Indicates a situation which, if not observed 
and handled properly, could result in death or 
serious injury.

CAUTION

Indicates a situation which, if not observed 
and handled properly, could result in personal 
injury or property damage.

 This is a mark to call attention to the reader.

WARNING

Do not perform the following. If ignored, these may cause damage to 
the auto-cutter, breakdown, overheating, smoke, fire or electric shock. 
If the auto-cutter is damaged or breaks down, turn off the power to the 
printer and remove the power cord from the outlet and then consult your 
supplier.

 

z

Do not open the auto-cutter during operation.

 

The cutting blade can be very dangerous. Also, this can cause damage.

 

z

Prevent foreign matter from entering small openings of the 
auto-cutter

 

Inserting your finger or other foreign matter in the small openings of the 
auto-cutter can be extremely dangerous and can damage the cutter.

 

z

The user should never install or remove the auto cutter.

Содержание CL-S400DT

















Отзывы: