Citizen CKG-15K, Руководство по эксплуатации

Страница: 15 / 17

CKG counting scales user’s guide
- - 13
SECTION 11 CALIBRATION
11.1 Linear calibrate
Enter the parameter menus by password ”9999”
When the parameter menu show "F1 CAL" press the
TARE key.
The display will then show "unLoAd" to request all weight be removed from the platform.
Press the
TARE key to set the zero point.
The display will then show the first calibration weight request. Either put this weight on the
platform and then press the
TARE key. The scale should be stable before pressing the
TARE key to accept a weight. The stability indicator will turn on to show the value is
stable.
When calibration is finished the display will enter into weighing mode if it was successful.
Calibration weights
CKG SERIES
Model # CKG 3000 CKG 6000 CKG 15K CKG 30K
Weight 1 zero zero zero Zero
Weight 2 1000g 2kg 5kg 10kg
Weight 3 3000g 6kg 15kg 30kg
11.2 Normal calibrate
Enter the parameter menus by your password (default:”0000”)
When the parameter menu show "F1 CAL" press the
TARE key.
The display will then show "unLoAd" to request all weight be removed from the platform.
Press the
TARE key to set the zero point.
Key in the calibration weight you want to use, then put this weight on the platform and then
press the
TARE key. The scale should be stable before pressing the TARE key to accept a
weight. The stability indicator will turn on to show the value is stable.
When calibration is finished the display will enter into weighing mode if it was successful.
SECTION 12 ERROR CODES
During the initial power-on testing or during operation it is possible the scale may show an
error message. The meaning of the error messages is described below.