Citizen CH-403C, Инструкция по эксплуатации, Страница: 9 / 13

SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
AVE.
1 2 3 4 5 6 7
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
AVE.
1 2 3 4 5 6 7
When a pulse is detected, the pressure value moves to the
right side of the display. At this time the mark “
Q
” flashes
and buzzer sounds.
When the diastolic pressure value is detected, the measure-
ment is completed and buzzer sounds.
Systolic pressure is displayed on the left and diastolic pres-
sure on the right side of the display.
2 or 3 seconds later, pressure value and pulse appear alter-
nately on the display.
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
AVE.
1 2 3 4 5 6 7
CH-403C
MEMORY
START POWER
SELECT
6. Subsequent measurements
When a measurement need to be made again, just press the
“Start Switch” again.
5. Turn power off
Press the “Power Switch” to turn OFF.
2 to 3 seconds after completion of measurements, the mark
“
▼
” appears and air will deflate immediately.
CH-403C
MEMORY
START POWER
SELECT
When the pressure setting is needed to be changed, press
the “Pressure Setting Switch” and select optimum value.
7. Change of the pressure-setting value
English
- Eng 9 -