manualshive.com logo in svg

Citizen CARAT BALANCES CT103, Руководство по эксплуатации

Поделиться
Скачать
Citizen CARAT BALANCES CT103 Скачать руководство пользователя страница 52

102

The windows direct communication 
function enables you to send the data 
from the balance directly to any 
windows application program for e.g. 
Microsoft word, excel etc.

The printer settings in the user menu will 
be applicable to the windows direct 
communication also i.e. Data Transfer 
Mode, Baud rate, Parity, Stop Bit and GLP 

The settings attributed to windows direct 
communication are

• Unit ON or OFF.
• Separator type ENTER or TAB.

To enable windows direct comm-
unication, make sure that you have 
turned it on from the windows side as well.

Enter control panel.
Open ACCESSIBILITY OPTIONS from 
control panel.
In the general tab turn on serial key 
option.
Set the baud rate and COM port 
from the   settings option.

ð

ð

ð

ð

7.3.3  Power on Calibration

Press the CAL key when the LCM displays Auto CAL On or Off enter Power ON 
calibration options.

This setting enables the user to turn on or  turn off power on calibration.

Power on calibration will take place every time the balance is powered on.

Power on Cal will take place irrespective of whether CAL Test is On or Off.

Note : 

The Above setting is available with balances with internal calibration.

101

ð

 

ð

Click OK to accept the settings for 

       serial key.

Click APPLY and then OK to save the 
Accessibility options.

7.4  Windows Direct Communication

Содержание CARAT BALANCES CT103





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды