3.) Turn the crown clockwise or counterclockwise to move the mode hand so that either tip is pointing to
‘ALM’ or Alarm Mode. The Hour, Minute and 24 Hour hands will move to the current alarm time set in
memory.
4.) Now pull the crown out one additional ‘click’ to the Alarm time setting position. The alarm will
automatically be activated and the Function hand will move to indicate ‘ON’.
5.) Rotate the crown either clockwise or counterclockwise to set the desired alarm time. Remember that the
alarm time is based on the TME or Time mode, and not the L-TM or Local time mode. Pay close
attention to the 24 Hour hand to ensure that the proper AM or PM alarm time is set. (AM time is
indicated when the 24 hour hand points between 24 to 12. PM time is indicated when the 24 hour hand
points between 12 to 24)
6.) Press and release the
lower
right button to change the indication of the function hand to “ON” (alarm
on) or “OFF” (alarm off).
7.) Push the crown in two ‘clicks’ to the closed position. You have now completed setting the alarm. When
the alarm sounds at the set time, simply press either button to stop the tone.
Activating and Deactivating the alarm (Turning the alarm on or off)
1.) Once the alarm time is set, and the alarm function is activated, or set to ‘ON”, the alarm will sound at
the same time each day. There may be occasions however in which you have set the alarm time and
wish to deactivate (turn the alarm function OFF) or reactivate (turn the alarm function ON) this feature.
2.) Pull the crown out one ‘click’ and rotate it in either direction so that either tip of the mode hand is
pointing to ‘ALM’ or alarm mode.
3.) Pull the crown out one additional ‘click’ to the alarm time setting position.
4.) Press and release the lower right button to change the indication of the function hand to “ON” (alarm
on) or “OFF” (alarm off).
5.) Press the crown in two clicks to the closed position. This completes activating or deactivating the alarm.
