Basic Playback
1. Connect the DVD player to your TV and amplifier.
2. Turn on the TV.
3.
4. Turn down the volume on your amplifier, and then power it on.
5.
Set the TV to the AV input connected to the DVD player.
Set the amplifier to the AV input connected to the DVD player.
Preparation before playing:
Basic Operation
8
Using the remote control
Point the remote control at the remote sensor.
(The pictures below are for reference only.)
Remarks: Do not expose the remote sensor of the
DVD Player to a strong light source, such as direct
sunlight.
Notes:
Point the remote control directly at the
player's remote sensor.
Do not leave the remote control in an
extremely hot or humid place.
Do not spill water or put anything wet
on the remote control.
Battery life is 1 year under normal
conditions.
STEP 3 - Press the PLAY/PAUSE
button on the front panel or
remote control. The player will
automatically read and identify
the disc, and begin playback.
STEP 2 - Press OPEN/CLOSE either on
the front panel or remote control. When
the tray is opened, place the disc on the
tray with the label side up. Press OPEN/
CLOSE again to close the disc tray.
STEP 1 - Press POWER to
start the player. The DVD
logo appears on the TV
screen.
o
30
o
30
7m
Advanced Features
Modes and Features Setup
9
SETUP
In stop mode, press <SETUP
>
, and the TV screen
will display the Setup Menu as follows:
A. Press <ENTER> to display each submenu
B. Press <SETUP> to exit the Setup Menu
Setup Menu
Press to change items
Note:
The Composite video and S-video output is always available.
3. VIDEO
[S-VIDEO]-Select if you connect the DVD player to your TV using
S-VIDEO output.
[INTERLACE-YUV] -Select if you connected the DVD player to your TV
using the YUV(Y,Cb,Cr) output.
[TV-RGB] -not available in North America.
[P-SCAN YPbPr] - Select if you connected the DVD player to your TV
using progressive scan(Y,Pb,Pr).
* The default setting is S-VIDEO.
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
P-SCAN YPBPR
S-VIDEO
INTERLACE-YUV
TV-RGB
2. SCREEN SAVER
SYSTEM SETUP
TV SYSTEM
ON
OFF
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
If the screen saver is on,when your DVD player is in Stop,Open,or No Disc
state,or there is a frame frozen for more than 180sec,the screen saver will
be displayed.This feature can protect the screen from damage.
[ON] - Choose this setting to activate the screen saver.
[OFF]- Choose the setting to cancel the screen saver.
* The default setting is ON.
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
System Setup
Select [SYSTEM SETUP] in the Setup Menu, and
the submenu will arise as follow:
Press to select the menu item
A.Press <ENTER> or to set
B.Press or repeatedly
to return to the Setup Menu
[NTSC] -Select if you are using NTSC signal system to match your TV set.
[PAL] -Select if you are using PAL signal system to match your TV set.
* The default setting is NTSC.
SYSTEM SETUP
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
NTSC
PAL
TV SYSTEM
1. Select [TV SYSTEM] in the System Setup Menu
to display the [TV SYSTEM] Submenu:
Press to select the menu item
A.Press <ENTER> to set
B.Press or repeatedly
to return to the Setup Menu
C.Press <SETUP> to exit the Setup Menu
4. TV TYPE
[4:3 PS] -Pan and scan refes to pictures where part of pictures is cut
off so it fills the whole screen.
[4:3 LB] -Letter Box refers to pictures where black bands appear at
the top and bottom.
[16:9] -The picture fills the screen of a wide-screen(16:9) television.
* The default setting is 4:3PS.
Note: Not all DVDs offer movies in Full Screen format. If not, the disc
will override your TV Display setting and the movie will be
displayed in Letter box format.
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
4:3 LB
16:9
4:3 PS