9. THERMOMETER
A. Methods of measurement
As described below, there are two methods of measuring temperature.
The most recently measured temperature is displayed in the Time mode
(approximate temperature is graphically displayed in both the “time display” and
the “city selection display”) and in the Timer mode. Also, switching between
Celsius display (°C) and Fahrenheit (°F) display is possible.
<Automatic temperature measurement>
Temperature is automatically measured every hour on the hour, with the
temperature display then being updated. However, measurement will not be
carried out if the Chronograph mode or Time/Calendar mode is in the
adjustment mode (blinking display) at measurement time.
<Temperature measurement by button operation>
If you change to the “calendar, temperature display” in the Time/Calendar mode,
the temperature will be measured at 2-second intervals for 2 minutes.
25
24
<Changing the mode during time measurement in chronograph mode>
Even if button
M
is pressed during a time measurement in chronograph mode
and mode is changed, time measurement is continued internally. The measured
time is shown when the mode is returned to chronograph again. However, if the
time measurement is continued for more than 24 hours, the chronograph stops
at the reset state.
*
Confirmation sound and EL light
At the time of start, stop, split time check or reset operation in chronograph
mode, a confirmation sound is heard.
At the time of stop or a split time measurement, the EL light is turned on with
the sound.
Split time: Elapsed time from start point
Split time
Split time
Start point
Goal
