35
34
13. Using the Timer
The timer can be set to a maximum of 99 minutes in 1 minute units. When the
set time has elapsed, a tone indicating that the set time is up, sounds for about 5
seconds, after which the timer returns to the timer initial setting display.
<Setting the Timer>
1. Turn the crown to set the mode hand to the timer
[TMR] mode.
2. Pull out the crown to the first click (timer setting
position) to enter the “minutes” correction state.
· “Timer Setting Time (Minutes)” flashes in digital
display-2.
3. Turn the crown to set the “minutes” timer setting
time.
· When turning the crown to the right (clockwise),
correction can be made in the positive direction.
When turning the crown to the left (counter
clockwise), correction can be made in the
negative direction.
4. After setting, return the crown to the normal
position.
<Timing using the Timer>
1. When pressing button (A) the timer starts counting
down from the time set.
2. Pressing button (A) again during measurement
stops the timer and pressing button (A) once more
while the timer is stopped, restarts the timer.
· Pressing button (B) during timer measurement
returns the watch to the timer initial setting display
and resumes countdown from the beginning.
3. Pressing button (B) when the timer is stopped
returns the watch to the timer initial setting display.
* When pressing the button, the operation
confirmation tone sounds.
<Timer Initial Setting
Display>
<Timer Initial
Setting Display>
Initial setting display
Stopped
Measurement
(B)
(A)
(A)
(A)
(B)
60
50
20
40
20
30
18
6
12
24
60
50
20
40
20
30
18
6
12
24
Press
Press
60
50
20
40
20
30
18
6
12
24
(A)
(B)
