Citizen bn4026 Скачать руководство пользователя страница 69

Страница: 69 / 81

Precautionary items and usage limitations

CAUTION

When Wearing Your Watch

<Band>

• Leather bands and rubber (urethane) bands will deteriorate over time due to perspiration dirt.

Because of the natural materials, leather band will be worn, deformed, and discolored over

time. It is recommended to replace the band periodically.

• The durability of a leather band may be affected when wet (fading, peeling of adhesive), owing

to the properties of the material. Moreover, wet leather may cause a rash.

• Do not stain a leather band with substances containing volatile materials, bleach, alcohol

(including cosmetics). Discoloration and premature aging may be occurred. Ultraviolet light

such as direct sunlight may cause discoloration or deformation.

• It is recommended to take off the watch if it gets wet, even if the watch itself is water-resistant.

• Do not wear the band too tightly. Try to leave enough space between the band and your skin to

allow adequate ventilation.

• The rubber (urethane) band may be stained by dyes or soil present in or on clothing or other

accessories. Since these stains may not be removable, caution is required when wearing your

watch with items that tend to easily transfer color (articles of clothing, purses, etc.). In addition,

the band may be deteriorated by solvents or moisture in the air. Replace with a new one when it

has lost elasticity or become cracked.

Содержание bn4026


















































































Результаты поиска

Содержание bn4026

Отзывы:

Бренды по названию

Популярные бренды

Citizen bn4026, Инструкция по эксплуатации

Результаты поиска

Содержание bn4026

Отзывы:

Бренды по названию

Популярные бренды