6
Remove the screw from the post. Insert it through the hole in the end of the vertical
fine adjustment rod and into the post. Turn the screw clockwise until it is tight.
(Fig. 6)
7) Remove the finder scope (with attached bracket) from the box. Remove the two
knurled thumbscrews from the telescope main tube (See Fig. 7). Position the finder
scope bracket onto the telescope tube so that the holes in the base of the bracket
line up with the exposed holes in the telescope tube. Replace the two knurled
thumbscrews and tighten securely (See Fig. 8).
(Fig. 7) (Fig. 8)
Azimuth Locking Knob