4
Operating System
Ignition Key Switch -
Insert the key and turn it clockwise to power on the lights, horn, and
control system.
Accelerator Pedal -
This controls the driving speed. Step on slowly to accelerate, push all the
way to the floor for full power. Release the pedal partially to reduce speed. Releasing the pedal
completely will cut power to the engine and the vehicle will come to a stop.
Brake Pedal -
Causes the vehicle to decelerate and stop.
Parking Brake -
Apply when parked.
Light Switch / Turn Signal –
Turn on for headlights, push lever UP for RIGHT turn signal, and
DOWN for LEFT turn signal.
Windshield Wiper -
Push switch to turn windshield wipers ON, back DOWN for OFF.
Voltage Meter
- This meter indicates the current power supply of battery. This can be found on
the digital dashboard.
Start Up Procedure
1) Turn the key clockwise to the ON position
2) Switch the vehicle into forward or reverse.
3) Release the parking brake.
4) Step on the accelerator pedal to begin moving.
Important Note: Your low speed vehicle will not run if you press the accelerator pedal
before turning the key to the ON position.
