4
o
Internally, the atomizer breaks up a high grade medicinal mineral proprietary formula into
such tiny particles, that it produces an opaque haze that is filtered several times to remove
larger size particles (over 20 microns) before it is mixed with the ambient air thrown 25’ from
the machine.
o
Because lights and lasers look best when fog is evenly distributed throughout the room, the
hazer has two built in circulation fans that circulate the air from the room with the haze. This
atmospheric effect lasts over 2-3 hours and is evenly dispersed from floor to ceiling, wall to
wall.
o
In just 3 months, a StarHazer II
TM
Haze Machine owner, using High Performance Fluid
(formerly called Diffusion Fluid) can regain the cost of this machine through lower costs of
operation…1/16 electricity, 1/30 fluid, and no breakdowns compared to hazers half the price
when used daily, year after year.
o
When the StarHazer II™ Haze Machine timer on the remote control (included) is used, you
have 100% less chance of ever having residue from over-hazing (turn it on and leave). Now
you can just set the timer and the unit will automatically, constantly turn on/off your unit
when the timer comes on.
1.
Safety instructions
WARNING: Read and understand all labels and operating
instructions before attempting installation.
o
Risk of electrical shock-
Never open the machine without disconnecting power lead first!
This device is supplied with a grounding conductor. To reduce risk of electrical shock,
connect only to properly grounded, grounding type receptacles. Never remove the third prong
from the plug.
o
This machine requires a 120VAC/10 A circuit for operation. During operation a circuit
should be dedicated to the StarHazer II
TM
Haze Machine. If you have any doubts about the
capacity or grounding of your existing circuits, consult a qualified electrician.
o
Never use water-based fluids.
This would cause irreversible damage to the tank. Operating
the pump with other than CITC Oil-based hazing fluid is not covered under warranty.
o
Be sure area around hazer is dry before applying electrical power.
o
Make sure that your unit is pointed in a direction that leaves a 12ft (4m) open area out in
front. Place the front of the machine away from direct contact with electrical instruments and
people. There is no heat in this unit.
o
Fluid is very slippery when spilled. Care in keeping any drips or spills cleaned up is
necessary.
o
Do not store StarHazer II
TM
Haze Machine in freezing conditions. Below 50
o
F it will not
start.
5. Operating the
STARHAZER II
TM
Haze Machine
5.1
Selecting the Location
Secure a good location for the machine to rest solidly on the floor so that the output of the
machine will not be restricted. Make sure that your unit is pointed in a direction that leaves an
