CTD-N Technical Manual
P/N 95F-6000-00 (February 2017)
page 59
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
•
Pressure
•
Salinity
•
Sound Speed
•
Battery Voltage
The parameters calculated by CTDPro are the following:
•
Conductivity and Temperature versus Pressure
•
Salinity
•
Sound Velocity
•
Density
•
TS Plot
Displaying Data versus Pressure or Time
You can display data either versus pressure or versus time on the horizontal axis of a graph. This
selection is made in the Properties dialog box, which is shown in Figure 6. To open the Properties
dialog box, choose File
➤
Properties. To select time for the horizontal axis, select the vs. Time op-
tion in the Plot Type area of the Properties dialog; to select pressure select the vs. Pressure option.
Viewing Data on a Graph
To view data on a graph:
1. Choose Start
➤
All Programs
➤
RD Instruments
➤
CTDPro.
CTDPro starts and the CTDPro Main window opens.
2. Choose File
➤
Open.
The Open dialog box for CTD data files shown in Figure 28 opens. If the file you want to
open is not visible, it may be in a different folder than the one shown. In this case, click the
arrow in the Look in drop-down list box and select the folder in which the file is located.
3. Click the CTD data file for which you want to display graphs, and then click Open.
The Open dialog box for CTD data files closes and the graphics display shown in Figure 30
opens to the Conductivity graph.
