CTD-N Technical Manual
page 102
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
The second standard is added to the table.
11. If required, repeat the setup and standard entries for as many additional standards as de-
sired in between the high and low standards.
The standards are added to the table and the graph as shown in Figure 56.
Figure 56.
The Calibrate Sensor Dialog Box—Setting Additional Standard Points Including the High Point
Standard
12. Click Calculate.
The Calibration Results window opens as shown in Figure 57 displaying the calibration
equation coefficients.
13. Click Store to write the calibration coefficients to the CTD-N.
Figure 57.
The Calibration Results Window
