Cissell KMAN589A, Руководство по обслуживанию

Страница: 9 / 27

Description of the Manual Press
The buck of the press is the bottom part of the press upon which the garment is to be placed and pressed. The head is the
upper part of the press. The head has a nylon handle used for closing.
Three foot pedals are located near the floor at the front of the press. The center pedal is the head locking pedal. The left
pedal activates the vacuum. The right pedal activates the buck valve which ports upsteam to the buck.
One black coated lever is located on the head. This lever operates a head valve for porting steam to the head.
One black knobbed lever is located on the head. This lever operates the head release.
Operation of the Manual Press (Allow the press to warm up for 20 min.)
Lay the garment to be pressed on the buck. Close the head by pulling down on the handle of the head. Apply pressure
and lock the head by stepping on the middle foot pedal and applying toe pressure. If head steam is desired, press down
on the head steam valve lever. If buck upsteam is desired step on the right foot pedal. Both may be operated at the
same time. The buck can be opened by pressing down on the release lever on the right side of the head steam valve.
Depressing the left foot pedal causes the vacuum valve to open and air is drawn through the garment for proper drying.
Lay the garment to a new position and repeat the above procedure as needed.
FIGURE 3
LAYOUT FOOT PRINT
Page 9