Cissell DX4 CONTROLLER, Руководство пользователя

Страница: 29 / 36

29
4
Program development
Display information :
A drying cycle consists of " drying time + cool down time " (30 + 2 = 32 minutes). When
the cycle is started, the remaining drying time (here 30) is displayed. The cool down
time isn ' t taken into account.
When " YES " is choosen in the setting menu under " FLS " , then the dry time and the
temperature are displayed alternately. When the temperature is indicated with degrees
C , then the symbol ( °) is displayed. When the temperature is indicated for values, less
than 100 ° F , then this symbol "° F " is displayed.
When the heating is activated, then the decimal point lights up.
Change the remaining drying time.
The remaining drying time can be reduced or extended by means of the left or the right
button. If the drying time is reduced to
"
O
"
, then the cool down time starts.
Temporary interruption of the remaining drying time.
By opening the door, the cycle can be interrupted temporary in order to reload or to
check the drying level. All functions stop, " Dr " is blinking on the display and the led
of the button is also blinking. However, the drying time keeps on counting down. As
soon as the door is closed, the cycle needs to be started again.
Early termination of the drying cycle.
By pressing the middle button and releasing it again, the drying cycle is terminated.
" E n d " is displayed until the door is opened.
End of the drying time : change to cool down time
When the drying time has come to an end (here 30 minutes), the cool down time is
automatically started (here 2 minute). This cool down time is completely separated
from the drying time. The remaining cool down time is displayed alternately with
"
C d
"
.
Remark :
The cool down temperature isn
'
t displayed.
When the cool down period is started, the remaining time can ' t be changed
anymore.
End of the drying cycle.
When the cool down time has come to an end, then the cycle is automatically
terminated. (here after 30 + 2 = 32 minutes) " End
"
is displayed until the door is
opened.