background image

12

4

Operating instructions

Machine with start button

Sort the linen according to the type and required temperature of the linen. Empty
all pockets of the garments so that no garments can be damaged and no left articles
can cause damage to the machine. Turn sleeves of shirts, blouses inside out. It is
recommended to mix small and large items to enhance the drop of the linen during
the wash cycle and hence improve the wash quality. Wash loads of 

below 80%

of machine capacity 

can obstruct the proper functioning of the machine and can

damage the machine

. Overloading the machine can also lead to a bad wash result.

It is recommended to only use detergents with a “

foam-breaker

”. These are often

found in the launderette or laundry or can easily be found in retail stores.
Recommended doses are mentioned on the detergent packing.
Overdosing of detergents can lead to reduced wash results and “overfoaming”
which can damage the machine.

Close the door

Fill the drum

On machines with a start button, the programmer can contain up to 100 programs
(0-99). The program number is displayed on the 

right display.

By pressing the SELECT-button (P), the next program will be displayed.
By pressing the ECO-button (E), the previous program will be displayed. By
keeping this button pressed, this function will be accelerated.

Remark

Select program “0” by keeping the SELECT-button pressed continuously for more
than 5 seconds.

Add detergent

Left compartment A:

Prewash (1st wash)

Central compartment B:

Main Wash (2nd wash)

Right compartment C:

Final Rinse (fabric softener)

Bottom compartment D:

Direct access to tub

Moderately soiled linen can be washed using the Economy Wash function, which
reduces the water level of washes and rinses by 

20%

, allowing savings of water

and energy.
Press the ECO-button 

during the wash cycle

 to activate the economy wash

function. The ECO-LED will light up.
At the 

end of the program

 the ECO-function will be automatically eliminated. If

the ECO-function is required in the following wash cycle as well, reactivate this
function by repeating the actions described above.

Economy Wash

Opening the door

Push the red button on the door handle to open the door.

Select program

Содержание CHHW50-WE176-234
































Отзывы: