Cissell BOOSTERMAN386, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 8 / 26

Page 8
Information subject to change without notice.
PRELIMINARY ASSEMBLING OF PISTON ROD
HYDRAULIC PART (Figure 2)
Mount NEEDLE BEARING 80011 into ROD HEAD 114 and screw this on to PISTON
ROD 10087.
Assemble successively on the PISTON ROD;
CHECK SPRING _____________________ 50 016
CHECKING RING ____________________ 10 088
HYDRAULIC PISTON ________________ 20 697
BACK-UP RING ______________________ 30 025
O-RING ______________________________ 30 029
PISTON PACKING RING _____________ 10 094 (check if it is damaged)
S P R I N G _____________________________ 50 019
PISTON ROD NUT ___________________ 10 095
After tightening the PISTON ROD NUT 10095 the hole at the bottom of PISTON ROD
10087 may be deformed somewhat. Please note, that this will not cause any difficulties
when assembling CHECKING DISC ASSY 110029 (see Figure 3).
This only appears on replacing the PISTON ROD 10087 and not on disassembling and
assembling in the normal way.