background image

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

5

AJ1032

Safety Information

Explanation of Safety Messages

Precautionary statements (“DANGER,” “WARNING,” 
and “CAUTION”), followed by specific instructions, 
are found in this manual and on machine decals. These 
precautions are intended for the personal safety of the 
operator, user, servicer, and those maintaining the 
machine.

Additional precautionary statements (“IMPORTANT” 
and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used 
to inform the reader of specific procedures where 
minor machine damage will occur if the procedure 
is not followed.

NOTE: The word “NOTE” is used to communicate 
installation, operation, maintenance or servicing 
information that is important but not hazard 
related.

Important Safety Instructions

Save These Instructions

1. Read all instructions before using the press.

2. Refer to the GROUNDING INSTRUCTIONS in 

the INSTALLATION manual for the proper 
grounding of the press.

3. Do not allow children to play on or around the 

press. 

4. Do not reach into the press while the press is in 

operation.

5. Do not install or store the press where it will be 

exposed to water and/or weather.

6. Do not tamper with the controls.

7. Do not repair or replace any part of the press, or 

attempt any servicing unless specifically 
recommended in the user-maintenance 
instructions or in published user-repair 
instructions that the user understands and has the 
skills to carry out.

8. To reduce the risk of an electric shock or fire, DO 

NOT use an extension cord or an adapter to 
connect the press to the electrical power source.

9. Use press only for its intended purpose, finishing 

garments.

10. ALWAYS disconnect the press from electrical 

supply before attempting any service. Disconnect 
the power cord by grasping the plug, not the cord.

11. Install the press according to the 

INSTALLATION INSTRUCTIONS. All 
connections for steam, electrical power and 
grounding must comply with local codes and be 
made by licensed personnel when required.

Indicates an imminently hazardous 
situation that, if not avoided, will cause 
severe personal injury or death.

DANGER

WARNING indicates the presence of a 
hazard that can cause severe personal 
injury, death, or substantial property 
damage if the warning is ignored.

WARNING

CAUTION indicates the presence of a 
hazard that will or can cause minor 
personal injury or property damage if the 
caution is ignored.

CAUTION

To reduce the risk of fire, electric shock, 
serious injury or death to persons when 
using your press, follow these basic 
precautions:

W372

WARNING

Содержание AJ1032























Отзывы: