Cissell AF1MAN60, Руководство пользователя

Страница: 27 / 30

Page 27 Page 27
Page 27 Page 27 Page 27
CA CA
CA CA CAUSE
USE
USE USE USE
1A Steam supply valve
off.
1B Electric power “Off ”
2A Loose wires
2B Incorrect voltage of
electrical parts
2C Defective start switch
2D Defective solenoid
2E Defective solenoid
linkage
3A Solenoid linkage
adjusted incorrectly
3B Loose valve seat
3C Worn valve
4A Trap not operating
4B Trap installed
incorrectly
4C Check valve installed
wrong or sticking
REMEDY REMEDY
REMEDY REMEDY REMEDY
Open valve in steam supply
line.
Inspect electric service for
blown fuses & loose connec-
tions. Turn main disconnect
“ON”.
Inspect and replace any loose
wires.
Inspect nameplate voltage and
voltage on electrical parts,
especially the solenoid. Replace
switch if necessary.
Check switch to see that it
operates and will carry current.
Replace switch if necessary.
Inspect solenoid. Replace if
necessary.
Check linkage between solenoid
and steam valve for broken or
loose parts. Repair or replace
as required. (See adjustment
instructions.)
Inspect linkage and adjust
according to instructions.
Tighten all lock nuts and set
screws.
Inspect and tighten seat if
required.
Inspect valve parts. Replace
worn parts as required.
Check size and operation of
trap. Repair or replace if
required.
Check to see that direction of
flow in trap is correct and that
trap is in or below machine
return line.
Check to see that direction of
flow is correct and valve not
sticking.
PROBLEM PROBLEM
PROBLEM PROBLEM PROBLEM
(1) No Steam
(2) Blower motor will start,
steam won’t start
(3) Leaking steam valve
(4) Wet steam