22
Chapter 5: Configuring the Dual-Band Wireless A+G Broadband Router
The Wireless Tab - Wireless MAC Filter
Dual-Band Wireless A+G Broadband Router
The Wireless Tab - Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your
network’s radius.
Wireless MAC Filter
Access Restrictions
To filter wireless users by MAC Address, either permitting or blocking access, click
Enabled
. If you do not wish to
filter users by MAC Address, select
Disabled
.
Prevent PCs listed below from accessing the wireless network
. Clicking this radio button will block wireless
access by MAC Address.
Permit PCs listed below to access the wireless network
. Clicking this radio button will allow wireless access
by MAC Address.
Wireless Client List
Wireless Client List
. Click the
Wireless Client MAC List
button to display a list of network users by MAC
Address.From the
To Sort by
drop-down menu, you can sort the table by Client Name, Interface, IP Address, MAC
Address, or Status. If you want to add any of the wireless clients to the Wireless MAC Filter List, then click the
Save to Wireless Client List
checkbox and then click the
Save Settings
button. Click the
Cancel Changes
button to cancel your changes. To view the most up-to-date information, click the
Refresh
button. To exit this
screen, click the
Close
button.
List users, by MAC Address, whose wireless access you want to control.
Change these settings as described here and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes. Help information is shown on the right-hand side of the screen. For additional
information, click
More
.
Figure 5-13: Wireless Tab - Wireless MAC Filter
Figure 5-14: Wireless Client List