Chapter 3
Configuration
9
Dual-Band Wireless-N ExpressCard
If the router does not support Wi-Fi Protected Setup,
proceed to the section, “No Wi-Fi Protected Setup”. If the
router supports Wi-Fi Protected Setup , proceed to the
section, “Wi-Fi Protected Setup”.
No Wi-Fi Protected Setup
If the router does not use Wi-Fi Protected Setup, proceed
to the appropriate section, “Wireless Security Disabled” or
“Wireless Security Enabled”.
Wireless Security Disabled
If you connect to a network whose wireless security is
disabled, then you will view this screen:
Click Connect Anyway
Click
1.
Connect Anyway
.
Click
2.
Finish
.
Congratulations
Congratulations! The Adapter is connected to
the network.
Wireless Security Enabled
If you connect to a network whose wireless security is
enabled, then you will view one of three screens.
Proceed to the appropriate instructions.
1.
WPA2 (Wi-Fi Protected Access 2)
If the network uses WPA2 Personal security, then
the
WPA2-Personal Key Needed for Connection
screen
appears.
WPA2-Personal Security
Passphrase
Enter the network’s Passphrase (also
called a pre-shared key) of 8-63 characters.
To connect to the network, click
Connect
. To cancel
the connection, click
Cancel
.
WPA (Wi-Fi Protected Access)
If the network uses WPA Personal security, then
the
WPA-Personal Key Needed for Connection
screen
appears.
WPA-Personal Security
Passphrase
Enter the network’s Passphrase (also
called a pre-shared key) of 8-63 characters.
To connect to the network, click
Connect
. To cancel
the connection, click
Cancel
.
WEP (Wired Equivalent Privacy)
If the network uses WEP encryption, then the
WEP Key
or Passphrase Needed for Connection
screen appears.
