Cisco App Package Names
Cisco Apps
com.cisco.logging
Logging
com.cisco.ptt
PTT
com.cisco.sysupdater
System Updater
com.cisco.webapi
Web API
Barcode App
The Webex Wireless Phone 840S and Webex Wireless Phone 860S have a built-in barcode scanner. The
Webex Wireless Phone 840 and Webex Wireless Phone 860 don't have a barcode scanner.
By default, the barcode scanner is enabled along with all supported symbologies. As the system administrator,
you control the
General settings
,
Default settings
, and
ScanFlex
settings of the
Barcode
app.
This is an OEMConfig app. To configure the app, your Enterprise Mobility Management (EMM) must support
the OEMConfig enhanced schema. If required, consult with your EMM support for assistance.
Note
As an administrator, you can:
• Enable and disable barcode scanning.
• Decide which symbologies to deploy.
• Set audible acknowledgments of a scan.
• Set the intensity of the scan light.
• Set the Enter key to move to the next field to be populated by scanning.
• Enable automatic enter of carriage return.
• Test scan barcodes before you give the phones to users.
Related Topics
Access the Cisco App Settings on the Phone
, on page 65
, on page 102
Barcode Symbologies
The Cisco Webex Wireless Phone 800S barcode scanner supports the following barcode symbologies.
Table 23: Supported Barcode Symbologies
Interleaved 2 of 5
Codabar
Aztec
ISBT-128
Code 11
CCA EAN-128
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
84
Cisco App Configuration
Barcode App