Cisco WAP300N, Руководство пользователя

Страница: 147 / 660

24
Maintaining and Monitoring
Linksys WAP300N
How to view device and local network
information
To view device and local network information:
1.
Log into the browser-based utility (see “How to open the browser-based
utility” on page 8)
2.
Click the
Status
tab, then click the
Device Info & Local Network
page
Device and network information appears
Firmware Version —The device’s current firmware version
Firmware Verification —Used by technical support to verify the
firmware
MAC Address —The device’s Ethernet port MAC address
IP Address —The device’s IP address, as seen on your local network
Subnet Mask
—The subnet mask configured for your local network
Default Gateway
—The default gateway configured for your local
network
How to view wireless network
information
To view wireless network information:
1.
Log into the browser-based utility (see “How to open the browser-based
utility” on page 8)
2.
Click the
Status
tab, then click the
Wireless Network
page Wireless
network information appears Available information depends on the
current operating mode, although the list below shows all possible fields
Operation Mode —The current operation mode of the device
MAC Address —The MAC address of the device’s wireless (Wi-Fi) interface
Link Status
—The status of the wireless connection
Network Name (SSID)
—The name of your wireless network
Network Mode
—Your wireless network’s network mode
Channel Width
—Your wireless network’s channel width (in MHz)
Radio Band
—Your wireless network’s radio band (in GHz)
Channel
—Your wireless network’s channel setting
Security —Your wireless network’s security mode