Cisco WAP125, Руководство администратора

Страница: 7 / 114

C H A P T E R
1
Getting Started
This chapter contains the following sections:
• Getting Started with the Configuration, page 1
• Using the Access Point Setup Wizard, page 2
• Changing Password, page 4
• TCP/UDP Service, page 4
• System Status, page 5
• Quick Start Configuration, page 6
• Window Navigation, page 6
Getting Started with the Configuration
This section describes the system requirements and how to access the web-based Configuration Utility.
Supported Browsers
Before you begin to use the configuration utility, make sure that you have a computer with Internet Explorer
9 or later, Firefox 46 or later, Chrome 49 or later, Safari 5.0 or later.
Browser Restrictions
• If using Internet Explorer 9, configure the following security settings:
◦ Select
Tools
,
Internet Options
and then select the
Security
tab.
◦ Next, select Local Intranet and then select Sites .
◦ Select Advanced and then select Add . Add the intranet address of the WAP device
http://<ip-address>
to the local intranet zone. The IP address can also be specified as the
subnet IP address so that all subnet addresses, are added to the local intranet zone.
• If you have multiple IPv6 interfaces on your management station, use the IPv6 global address instead
of the IPv6 local address to access the WAP device from your browser.
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE
1