3
Installing and Upgrading Cisco Video Surveillance Virtual Matrix (VSVM)
Installation Notes
•
Software:
–
Microsoft Internet Explorer 6.0
–
Microsoft DirectX 9.0c
Installation Notes
•
The Pegasus MJPEG video decoder is installed automatically with the VSVM
client.
•
Cisco recommends that you use NTP source to maintain the correct time on
the server. Configuring NTP should be done before video recording is
configured. The hardware clock should be set to use UTC time and the
appropriate time zone for the server. If you are using SUSE, you can use YaST
to configure the server time.
•
The performance of client devices can vary depending on client configuration
and applications.
Obtaining VSVM Software
The VSVM software is available from
http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=281550158
You must log in to the Cisco website to access the software. Select the Cisco
Video Surveillance Operations Manager software version for the appropriate for
your Linux version.
