Cisco VIC-2FXS - 3600 Voice Interface Card-Fxs 2600/3600, Руководство по подключению

Страница: 11 / 22

Connecting Voice Interface Cards to the Network
ISDN BRI Interface Cards
11
OL-12847-01
If you install any of the following configurations, the Cisco IOS software disables certain ports, as shown
in
Table 1 :
• An ISDN BRI voice interface card in a 1-slot voice network module (NM-1V)
•
Two ISDN BRI voice interface cards in a 2-slot voice network module (NM-2V)
• One ISDN BRI voice interface card and one analog voice interface card (VIC-2FXS, VIC-2FXO,
VIC-2FXO-EU, VIC-2FXO-M3, or VIC-2E/M) in a 2-slot voice network module (NM-2V)
Connecting ISDN BRI Interface Cards
Use a straight-through RJ-45 cable to connect ISDN BRI cards to the ISDN network through a telephone
wall outlet or other device.
Caution To prevent damage to the router, be sure to connect the BRI cable to the BRI connector only, and not to
any other RJ-45 connector.
To connect the 2-port ISDN BRI card to the router, follow these steps:
Step 1
Confirm that the router is still turned off.
Step 2
Connect one end of a straight-through RJ-45-to-RJ-45 cable to the RJ-45 port on the card. (See
Figure 15 .)
Table 1 How Cisco IOS Software Handles Voice Interface Card Ports
Network Module Slot Voice Interface Card Port Status
NM-1V 0 VIC-2BRI-S/T-TE,
VIC-2BRI-NT/TE 0 Up
1 Down
NM-2V 0 VIC-2BRI-S/T-TE,
VIC-2BRI-NT/TE 0 Up
1 Up
NM-2V 0 VIC-2BRI-S/T-TE,
VIC-2BRI-NT/TE 0 Up
1 Up
1 VIC-2BRI-S/T-TE,
VIC-2BRI-NT/TE 0 Down
1 Down
NM-2V 0 VIC-2BRI-S/T-TE,
VIC-2BRI-NT/TE 0 Up
1 Up
1 Analog voice interface card 0 Down
1 Down
NM-2V 0 Analog voice interface card 0 Up
1 Up
1 VIC-2BRI-S/T-TE,
VIC-2BRI-NT/TE 0 Up
1 Down