Cisco UNIFIED 9971 Скачать руководство пользователя страница 84 | Manualshive

Страница: 84 / 104

background image

Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide

84

(Cisco Controller) >config wlan security wpa akm cckm timestamp-tolerance 5000 <WLAN id >

To confirm the change, enter

show wlan <WLAN id>

, where the following will be displayed.

CCKM tsf Tolerance...............................

5000

Auto-Immune

The Auto-Immune feature can optionally be enabled for protection against denial of service (DoS) attacks.
Although when this feature is enabled there can be interruptions introduced with voice over wireless LAN, therefore it is
recommended to disable the Auto-Immune feature on the Cisco Unified Wireless LAN Controller.
The Auto-Immune feature was introduced in the 4.2.176.0 release, which was enabled by default and non-configurable.
As of the 4.2.207.0, 5.2.193.0 and 6.0.182.0 releases this feature is disabled by default but can be enabled optionally.

To view the Auto-Immune configuration on the Cisco Unified Wireless LAN Controller, telnet or SSH to the controller and
enter the following command.

(Cisco Controller) >show wps summary

Auto-Immune
Auto-Immune....................................

Disabled

Client Exclusion Policy
  Excessive 802.11-association failures.......... Enabled
  Excessive 802.11-authentication failures....... Enabled
  Excessive 802.1x-authentication................ Enabled
  IP-theft....................................... Enabled
  Excessive Web authentication failure........... Enabled

Signature Policy
Signature Processing........................... Enabled

To disable the Auto-Immune feature on the Cisco Unified Wireless LAN Controller, telnet or SSH to the controller and enter
the following command.

(Cisco Controller) >config wps auto-immune disable

«
...
82
83
84
85
86
...
»

Содержание UNIFIED 9971









































































































Отзывы:

Нет отзывов

Похожие инструкции для UNIFIED 9971

Бренд: meanIT Страницы: 26

Бренд: MTT Страницы: 34

Бренд: Ulefone Страницы: 32

Бренд: Archos Страницы: 75

Бренд: Brava Страницы: 97

Бренд: Alcatel Страницы: 61

Бренд: Sony Ericsson Страницы: 114

Бренд: Verykool Страницы: 58

Бренд: Sagem Страницы: 96

Бренд: Jabbla Страницы: 30

Бренд: Micromax Страницы: 64

Бренд: Xiaomi Страницы: 9

Бренд: Zte Страницы: 62

Бренд: Avvio Страницы: 46

Бренд: avus Страницы: 70

Бренд: Avvio Страницы: 30

Бренд: Avvio Страницы: 47

Бренд: Zte Страницы: 159

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды