background image

    1         31     3 Sfp Not Present  8C:60:4F:BC:C4:D6    Unknown N/A

    1         31     4 Sfp Not Present  8C:60:4F:BC:C4:D7    Unknown N/A

    1         32     1 Sfp Not Present  8C:60:4F:BC:C4:D8    Unknown N/A

    1         32     2 Sfp Not Present  8C:60:4F:BC:C4:D9    Unknown N/A

    1         32     3 Sfp Not Present  8C:60:4F:BC:C4:DA    Unknown N/A

    1         32     4 Sfp Not Present  8C:60:4F:BC:C4:DB    Unknown N/A

    1         33     1 Up               8C:60:4F:BC:C4:DC    Fcoe Uplink

                                                                     QSFP 40G SR4

    1         33     2 Up               8C:60:4F:BC:C4:DD    Fcoe Uplink

                                                                     QSFP 40G SR4

    1         33     3 Up               8C:60:4F:BC:C4:DE    Network N/A

   1         33     4 Up               8C:60:4F:BC:C4:DF    Network N/A 1 34 1 Sfp Not Present

8C:60:4F:BC:C4:E0 Unknown N/A 1 34 2 Sfp Not Present 8C:60:4F:BC:C4:E1 Unknown N/A 1 34 3 Sfp

Not Present 8C:60:4F:BC:C4:E2 Unknown N/A 1 34 4 Sfp Not Present 8C:60:4F:BC:C4:E3 Unknown N/A

FC Port:

Slot  Port  Oper State       Wwn

----- ----- ---------------- ---

   1     1 Up               20:01:8C:60:4F:BC:C4:80

   1     2 Up               20:02:8C:60:4F:BC:C4:80

   1     3 Sfp Not Present  20:03:8C:60:4F:BC:C4:80

   1     4 Sfp Not Present  20:04:8C:60:4F:BC:C4:80

   1     5 Sfp Not Present  20:05:8C:60:4F:BC:C4:80

   1     6 Sfp Not Present  20:06:8C:60:4F:BC:C4:80

In NXOS, breakout ethernet ports are named  as br-ethernet x/y/z.

UCS-6332-A# # connect nxos a

UCS-6332-A(nxos)# show int br-ethernet 1/33/1

Br-Ethernet1/33/1 is up

 Dedicated Interface

  Hardware: 10000 Ethernet, address: 8c60.4fbc.c4dc (bia 8c60.4fbc.c4dc)

  Description: C: FcoeUplink

  MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec

  reliability 255/255, txload 1/255, rxload 1/255

[...]

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.

Содержание UCS-FI-6332-16UP

Страница 1: ...ct Specifically this document covers configuring System QoS fibre channel interfaces and 4x10GE breakout interfaces You may as well wish to add additional steps of setting Ethernet and Fibre Channel FC switching modes Prerequisites Requirements Cisco recommends that you have knowledge of these topics Cisco Unified Computing System UCS Manager Cisco Unified Computing System UCS Manager Command Line...

Страница 2: ... 1 1 16 on the 6332 16UP Fibre Channel port modes must be configured such that the last FC port occupies port id 6 12 16 This results in a minimum of six FC ports and a maximum of sixteen Valid port combinations are Ethernet 1 1 1 16 FC 1 1 1 6 Ethernet 1 7 1 16 FC 1 1 1 12 Ethernet 1 13 1 16 FC 1 1 16 UCS 6332 A scope fc uplink UCS 6332 A fc uplink scope fabric a UCS 6332 A fc uplink fabric creat...

Страница 3: ...332 A fc uplink fabric interface top Save the Configuration Once the changes are committed reboot Fabric Interconnect A UCS 6332 A commit buffer The switch will now reboot Repeat the changes on Fabric Interconnect B Verify Confirm ports FC 1 1 6 are configured for Fibre Channel and ports Ethernet 1 31 34 are in Breakout mode Notice the breakout ports now have 4 subinterfaces In this example ports ...

Страница 4: ... Present 8C 60 4F BC C4 E2 Unknown N A 1 34 4 Sfp Not Present 8C 60 4F BC C4 E3 Unknown N A FC Port Slot Port Oper State Wwn 1 1 Up 20 01 8C 60 4F BC C4 80 1 2 Up 20 02 8C 60 4F BC C4 80 1 3 Sfp Not Present 20 03 8C 60 4F BC C4 80 1 4 Sfp Not Present 20 04 8C 60 4F BC C4 80 1 5 Sfp Not Present 20 05 8C 60 4F BC C4 80 1 6 Sfp Not Present 20 06 8C 60 4F BC C4 80 In NXOS breakout ethernet ports are n...

Отзывы: