Note: Pictured above is a Cisco UCSM equipment view of the Emulex installed adapters.
The service profile also supports vNIC/vHBA placement in UCSM GUI, which allows for Virtual Interface
Adapter properties configuration of selection preference:
All: Any vNIC/vHBA can be assigned to this Virtual Interface Adapter.
•
Assigned−Only: Only the explicitly assigned vNIC/vHBA can belong to this Virtual Interface
Adapter.
•
Exclude−Dynamic: UCSM cannot assign dynamic vNICs to this Virtual Interface Adapter.
•
Exclude−Unassigned: UCSM cannot assign static (non dynamic) vNICs to this Virtual Interface
Adapter.
•
The above selection preference options indicate how UCSM can use this Virtual Interface Adapter when it
assigns a vNIC/vHBA.
Note: Numerical order means vNIC/vHBA can be ordered inside a Virtual Interface Adapter.
This shows selection preference where vCon1 is assigned all and vCon2 is assigned assigned−only:
