Cisco Unified Communications 500 Series Model UC 540 Quick Start Guide
15
Verifying the Hardware
Installation
To verify the hardware installation, complete the following tasks:
•
Check the status of the UC 540 by looking at the LEDs on the front panel
See
LEDs, page 8
.
•
Check that the devices connected to the PoE ports are all receiving
power.
Verify the communications.
•
To test IP connectivity, launch a Web browser and enter
http://192.168.10.1. When the authentication window appears, this
means that your system is active.
•
Make sure that each connected IP phone displays an internal extension
number or a line number, on at least one of the phone line buttons. Verify
the phone connectivity by making a call from one phone to another.
N
OTE
If you need help resolving a problem, go to the Cisco Small
Business Support Community website at:
http://www.cisco.com/
go/smallbizsupport
. For technical documentation and other links,
see
Suggested Next Steps, page 20
and
Where to Go From
Here, page 21
.
6
5
