The figure below shows the rear view (CMTS side) of the upstream-only version of the
Cisco UBR-RFSW-ADV.
Figure 4: Upstream-Only Version of Cisco UBR-RFSW-ADV
—
Rear View (CMTS Side)
Upstream protect cards
2
Upstream switch card
1
The table below lists the Cisco UBR-RFSW-ADV chassis dimensions.
Table 1: Cisco UBR-RFSW-ADV Chassis Dimensions
Dimension
Unit
17.70 in (44.96 cm)
—
measured from front connector panel face to rear connector panel
face
19.46 in (49.43 cm)
—
measured from front connector handle to rear connector handle
Chassis Depth
17.28 in (43.89 cm)
Chassis Width
3 rack units
Chassis Height
Two types of rack-mounting are supported for the Cisco UBR-RFSW-ADV:
•
Mounting a Single Cisco UBR-RFSW-ADV Above a Cisco uBR10012 Universal Broadband Router
•
Mounting Two Cisco uBR10012 Universal Broadband Routers and Two Cisco UBR-RFSW-ADVs in
a Single Rack
For more details on rack-mounting, see
Rack-Mounting the Cisco UBR-RFSW-ADV with the Cisco
uBR10012 Router
.
Note
For more information about the Cisco UBR-RFSW-ADV product identifiers (PIDs), see
Power Requirements
.
Cisco uBR Advanced RF Switch Hardware Installation Guide
4
OL-24104-01
Introduction
Overview